If you’re looking to clear your Ford’s OBD1 codes, there are a few ways you can go about it. Now, after any modification, you’ll want to clear your codes so that your car doesn’t go into limp mode or throw any check engine lights.
So, how do you do it?
In this article, we’ll be covering three different ways that you can clear your Ford car’s OBD1 codes. We’ll also touch on why you might want to clear your codes in the first place.
Let’s get started!
What is Ford OBD1?
Before we dive into how to clear your codes, let’s first talk about what Ford OBD1 is. OBD1 is a diagnostic system that was used on vehicles between the years 1991 and 1995. This system was eventually replaced by OBD2, which is the standard diagnostic system for modern vehicles.
While OBD2 is the standard system now, there are still a handful of vehicles that use OBD1. If your vehicle was manufactured between 1991 and 1995, there’s a good chance it uses the OBD1 system.
Why Would I Need to Clear My Codes?
There are a few different reasons why you might need to clear your codes. The most common reason is after you’ve made modifications to your vehicle.
- If you’ve installed a new intake, exhaust, or any other aftermarket part, you’ll need to clear your codes. This is because your car will think something is wrong since it’s not used to the new parts. By clearing the codes, you’re telling your car that everything is fine and that it should run normally.
- Another reason you might need to clear your codes is if your check engine light is on and you can’t figure out why. In this case, clearing the codes can help reset the system and turn off the light.
- Lastly, you might need to clear your codes if your car is going into limp mode. Limp mode is when your car’s computer limits the engine’s power to prevent further damage.
- This can happen if there’s an issue with one of your sensors or if your car is running too hot.
- If your car goes into limp mode, you’ll need to clear the codes so that it can start running normally again.
How To Clear Ford OBD1 Codes
Now that we’ve covered what Ford OBD1 is and why you might need to clear your codes, let’s get into how to do it. There are a few different ways you can go about clearing your codes, and we’ll cover three of the most common methods.
The first method is to use a code reader. A code reader is a small device that you can plug into your car’s OBD port. This will allow you to read and clear your codes. Code readers are relatively inexpensive and can be found at most auto parts stores.
The second method is to use a scan tool. A scan tool is a more advanced version of a code reader. It will not only allow you to read and clear your codes, but it will also give you more information about what is causing the codes.
Scan tools are more expensive than code readers, but they’re still relatively affordable. You can find them at most auto parts stores or online.
The third and final method is to take your car to a professional. If you don’t feel comfortable clearing your codes yourself, you can always take your car to a mechanic or dealership.
They will be able to clear the codes for you and help you troubleshoot any issues you’re having.
How Do I Reset My OBD1 Check Engine Light?
If your check engine light is on, you can reset it by clearing the codes. To do this, you’ll need to use a code reader or scan tool.
Just follow the instructions that come with your device, and you should be able to clear the codes and turn off the light.
Clearing the codes won’t fix the underlying issue, so you’ll still need to diagnose and repair the problem. Otherwise, the light will just come back on.
How Do You Manually Clear Codes on a Ford?
If you want to clear your codes without using a code reader or scan tool, you can do it manually. To do this, locate your car’s diagnostic connector and jump terminals A and B together.
This will cause your car to cycle through all of its codes. Once it’s done, the check engine light should turn off, and the codes will be cleared. Keep in mind that this method will only work if your car is OBD1 compliant.
If your car is OBD2, you’ll need to use a code reader or scan tool.
How Often Should I Clear My Ford Codes?
You don’t need to clear your codes unless you’re having an issue or you’ve made modifications to your car. If your check engine light is on, you can try clearing the codes to see if that turns it off.
If it doesn’t, there’s likely a problem with your car, and you’ll need to take it to a mechanic to have it diagnosed and repaired. If you’ve made modifications to your car, you might need to clear the codes so that your computer can re-learn the new settings.
Other than that, there’s no need to regularly clear your codes.
Will Disconnect Battery Reset Codes?
Disconnecting your battery will not reset your codes. However, it will clear any pending codes that haven’t been stored yet. So, if your check engine light is on and you disconnect your battery, the light will go off.
But, once you reconnect the battery and start your car, the light will come back on if there’s still a problem.
Final Thoughts – How To Clear Ford Obd1 Codes?
Ford OBD1 is a diagnostic system that was used on all Ford vehicles from 1984 to 1995. If you have a Ford OBD1 vehicle, you might need to clear your codes at some point. This can be done with a code reader or scan tool.
You can also take your car to a professional if you don’t feel comfortable doing it yourself.
I hope this guide has helped you enough to know How To Clear Ford Obd1 Codes? Happy reading
You can also read: 1998 Ford F150 Brake Problems